Updated design allows for customization of the mounting platform. Option of three different lower mounts, with a full length lower rail, forward ...
Updated design allows for customization of the mounting platform. Option of three different lower mounts, with a full length lower rail, forward rail and rear rail. Placement of lower rail allows for optics to be positioned in the ideal location front to back, as well as right to left. Lightweight CNC machined aircraft grade 6061 T6 aluminum. Position optics in co-witness location. Allows field stripping of the rifle without removal of the optic on most AK variants. Redesigned thumb lever lock retains zero even after repeated optic removal and reinstallation. Ability to stake position for extreme duty.
AKML allows the mounting of the Aimpoint T-1 and H-1 Micro Red Dot Optics
AKOG allows the mounting of Trijicon ACOG sight systems
Big Book Catalog, Issue:71, Page:260
SPECS: 6061 T6 aluminum, matte black Teflon coated finish. Accepts optics with 30mm OD tube. Fits AK and AKM rifles equipped with receiver side mount base dovetail. Base not included.
Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly, without alteration, to the ...
Maximum Support, Superior Strength-To-Weight Ratio
Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly, without alteration, to the side receiver ring, charger guide dovetail and receiver mount lug. Precision-cut rail includes 5º angle milled on the underside for easy case ejection without hang-ups; accepts Picatinny and Weaver-style rings. Open sight channel gives unobstructed view of back-up iron sights. Standard model is available in three strength-to-weight combinations. Steel model is fully machined from stress-relieved 4142 chrome-moly steel barstock, hardened to Rc 28-32 for maximum strength. Aluminum model is machined from 7075 bar stock aluminum and hardcoat anodized matte black for durability. Airborne model features a lightweight skeletonized frame with seven, 3/8" diameter CNC machined lightening holes in the top of the rail for reduced weight without sacrificing strength. Machined from chrome-moly steel bar stock and heat-treated to Rc 50 for superior strength. Mil-Spec Parkerized finish resists abrasion and corrosion. Adopted by the 101st Airborne.
Big Book Catalog, Issue:71, Page:259
SPECS: 5-7⁄16" (13.8cm) long, 2" (5.1cm) wide, 1¾" (4.4cm) high. Includes mounting hardware, Allen wrenches, and complete instructions. Steel - 4142 chrome-moly steel, hardened to Rc 28-32, mil-spec manganese phosphate Parkerized, matte black. 11.8 oz. (334g) wt. Aluminum - 7075 aircraft aluminum bar stock, hard coat anodized, black, matte finish. 7.52 oz. (213g) wt. Airborne - Steel, chrome-moly, Parkerized, black, matte finish. 9.4oz. (266g) wt.
Remington 700 Short Action Scope Rails Badger Ordnance.
Badger Ordnance’s Remington Short Action Scope Rail is a heavy-duty steel base with built-in forward angle bias so you can take those ...
Forward Cant Helps You Zero Your Scope for Extended Ranges
Badger Ordnance’s Remington Short Action Scope Rail is a heavy-duty steel base with built-in forward angle bias so you can take those ultra-long-range shots without exceeding the elevation adjustment of your scope.
The Badger Ordnance Remington Short Action Scope Rail has a MIL-STD 1913 Picatinny slot pattern for maximum compatibility with the many Picatinny tactical scope rings currently available.
Bore height dimension is .31"
The Badger Ordnance Remington Short Action Scope Rail has an integral recoil lug that ensures this base won’t move, even when shooting the hardest-kicking cartridges.
Big Book Catalog, Issue:71, Page:257
Marlin 1894/1895/336/308mx Lever Rail Sight System Xs Sight Systems.
Lightweight scope rail with backup iron sights mounts to Marlin lever rifles without drilling and trapping. Features a large light-gathering rear ghost ring ...
Lightweight scope rail with backup iron sights mounts to Marlin lever rifles without drilling and trapping. Features a large light-gathering rear ghost ring and high-visibility front post sight for fast sight acquisition during day or low-light conditions. Rear ghost ring is fully adjustable for windage and elevation, and includes interchangeable .191" and .230" diameter apertures for fine-tuning accuracy. One-piece front sight has easy-to-use .100" wide, white-line post. Rail accepts Picatinny or Weaver-style mounts. Extra-long design allows scope mounting directly over the receiver, or forward over the barrel with intermediate eye relief optics or red-dot sights. Requires removal of factory rear sight. Gunsmith installation recommended.
Big Book Catalog, Issue:71, Page:261 Big Book Catalog, Issue:71, Page:310
SPECS: Lever Rail - Aluminum, black, matte finish. 11" (27cm) long, .830" (21mm) wide. 3 oz. (85g) weight. Includes mounting hardware. Sights - Steel, black, matte finish. Ghost Ring Apertures - .191" (4.8mm) and .230" (5.8mm) I.D. Front Post - .100" (2.5mm) wide white line. 1895 fits Marlin 1895 with .700" (17.8mm) and 1" (2.5cm) c-to-c front ramp screws. 336 fits round barrel Model 336 rifles only.
Kel-Tec Gen 2 Sub 2000 Aluminum 1-Piece Pic Top Optic Mount Midwest Industries, Inc..
The Kel-Tec SUB 2000 is a great carbine design that can be packed up easily and carried anywhere, thanks to its innovative ...
Enhance Your Kel-Tec SUB 2000
The Kel-Tec SUB 2000 is a great carbine design that can be packed up easily and carried anywhere, thanks to its innovative folding design. However, the firearm doesn't offer an easy way to mount a user's optic of choice. The Midwest Industries SUB 2000 1-Piece Optic Mount allows owners to add a red-dot optic of their choosing.
The Midwest Industries SUB 2000 1-Piece Optic Mount is specifically designed for miniature red-dot sights, such as Bushnell's popular TRS-25 red dot. The mount provides users with a short length of Picatinny rail compatible with most mounting options on the market.
Features hard-anodized black finish
Weight: 2.7 ounces
Includes all mounting hardware
SUB 2000 1-Piece Optic Mount is completely made in the USA and comes with a lifetime warranty.